HANDS-FREE BLUETOOTH CONTROLLER for SMART READY TABLETS AND COMPUTERS Operating Manual
10 the PED will power down automatically. The timer is reset when any button is pressed. The PED averages a usage of 2μA when turned off and av
11 FIRMWARE UPDATES/CUSTOM MODES The PED supports an update protocol called OTA, (Over the Air). Download the free AirTurn Utility app from the Apple
12 CARE OF YOUR PED Use a mild detergent or soap-based cleaner to remove dirt and stains from your PED. Be careful not to use sharp tools or extreme p
13 WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO ONE YEAR FROM THE DATE OF THE PURCHASE. Some states do not allow limitations on ho
14 (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications
15 RECYCLING AND DISPOSAL Electronic components and construction comply with RoHS standards. Packaging is recyclable. Please recycle. Contai
16 PO Box 3359 Nederland, CO 80466 [email protected] www.airturn.com 888-247-1223
3 CONTENTS Before Turning on Your PED ... 4 Power ...
4 Thank you for purchasing the AirTurn PED hands-free, Bluetooth foot controller. We hope you enjoy many years of use from it. From page turning, to
5 POWER ON - Press and hold the Power Button on for one second and the LED’s flash. The blue LED will begin to blink 2 times per second unti
6 MODES There are six modes available on your PED. Each mode sends a different signal for each pedal. The PED is set to MODE 2 by default. MODE 1: PED
7 Note: Holding down the pedal in any MODE for more than two seconds will repeat the key action until released. CHANGING THE MODE 1. Turn on the PED.
8 PAIRING IN PED-APP-DIRECT MODE 1 Note: This MODE is for PED-APP-Direct apps only. 1. Power on the PED. 2. Be sure the PED is in MODE 1. 3. Go to
9 When the PED connects, the blue LED will blink 3 times per second. Once paired, the blue LED will blink 1 time every three seconds. IMPORTANT:
Comments to this Manuals